6ES7677-2AA41-0FB0 là bộ điều khiển có thể lập trình (PLC) trên nền tảng PC được hãng SIEMENS sản xuất và phát triển với thương hiệu SIMATIC thuộc dòng ET 200SP. Bộ điều khiển mở SIMATIC ET 200SP, CPU 1515SP PC 6ES7677-2AA41-0FB0 được Công ty Cổ Phần UNATRO phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua CPU 1515SP PC 6ES7677-2AA41-0FB0 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Tổng quan về CPU 1515SP PC 6ES7677-2AA41-0FB0
Mô tả tóm tắt bằng tiếng Việt: Bộ điều khiển mở SIMATIC ET 200SP, CPU 1515SP PC. 4 GB RAM, 30 GB CFAST với WES 7 P 64 bit được cài đặt sẵn, với phần mềm điều khiển S7-1500 được cài đặt sẵn cho bộ điều khiển CPU 1505SP F. Giao diện: 1 khe cắm CFAST, 1 khe cắm thẻ nhớ SD/MMC, 1 cổng kết nối cho ET 200SP Bus Adapter PROFINET, 1 cổng Ethernet 10/100/1000 Mbit/s, 3 cổng USB, 1 cổng kết nối card đồ họa DVI-I, Tài liệu trên đĩa DVD, Khôi phục bằng đĩa DVD.
Mô tả tóm tắt bằng tiếng Anh: SIMATIC ET 200SP Open Controllers, CPU 1515SP PC. 4 GB RAM, 30 GB CFAST with WES 7 P 64 bit pre-installed, with S7-1500 software controller CPU 1505SP F pre-installed, Interfaces: 1x slot CFAST, 1x slot SD/MMC, 1x connection for ET 200SP bus adapter PROFINET 1x 10/100/1000 Mbit/s Ethernet, 3x USB, 1x DVI-I graphics card connection, Documentation on DVD, Restore DVD.
Bảng tóm tắt thông số kỹ thuật 6ES7677-2AA41-0FB0
Mã sản phẩm | 6ES7677-2AA41-0FB0 |
Dòng sản phẩm | SIMATIC ET 200SP, CPU 1515SP PC |
Hãng sản xuất | SIEMENS |
Xuất xứ | Germany (Đức) / DE |
RAM | 4 GB RAM |
Bộ nhớ | 30 GB CFAST |
Hệ điều hành | WES 7 P 64 bit |
Phần mềm mở rộng | Phần mềm điều khiển S7-1500 |
Nguồn cung cấp | 24 V DC (19.2 – 28.8 V DC) |
Kích thước (Rộng x Cao x Sâu) | 160 x 117 x 75 mm |
Trọng lượng | 830 g |
Bảng chi tiết thông số kỹ thuật 6ES7677-2AA41-0FB0
Article number | 6ES7677-2AA41-0FB0
CPU 1515SP PC 4GB |
General information | |
Product type designation | CPU 1515SP PC |
HW functional status | FS05 |
Firmware version | V2.1 |
Engineering with | |
● STEP 7 TIA Portal configurable/ integrated from version | V14 SP1 |
Installed software | |
● Visualization | No |
● Control | S7-1500 Software Controller CPU 1505SP V2.1 |
Configuration control | |
via dataset | Yes |
Control elements | |
Mode selector switch | 1 |
Supply voltage | |
Type of supply voltage | 24 V DC |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Mains buffering | |
● Mains/ voltage failure stored energy time | 5 ms |
Input current | |
Current consumption (rated value) | 1.5 A; Full processor load, incl. ET 200SP modules and using USB |
Current consumption (in no-load operation), typ. | 0.6 A |
Inrush current, max. | 4.7 A; Rated value |
Power | |
Active power input, max. | 36 W; incl. ET 200SP modules and using USB |
Infeed power to the backplane bus | 8.75 W |
Power loss | |
Power loss, typ. | 15 W; without ET 200SP modules and without using USB |
Processor | |
Processor type | Dual-Core 1 GHz, AMD G Series APU T40E |
Memory | |
Type of memory | DDR3-SDRAM |
Main memory | 4 GB RAM |
CFast memory card | Yes; 30 GB flash memory |
SIMATIC memory card required | No |
Work memory | |
● integrated (for program) | 1 Mbyte |
● integrated (for data) | 5 Mbyte |
● integrated (for CPU function library of CPU Runtime) | 10 Mbyte |
Load memory | |
● integrated (on PC mass storage) | 320 Mbyte |
Backup | |
● with UPS | Yes; all memory areas declared retentive |
● with non-volatile memory | Yes |
CPU processing times | |
for bit operations, typ. | 10 ns |
for word operations, typ. | 12 ns |
for fixed point arithmetic, typ. | 16 ns |
for floating point arithmetic, typ. | 64 ns |
CPU-blocks | |
Number of elements (total) | 6 000; In addition to blocks such as DBs, FBs and FCs, UDTs, global constants, etc. are also regarded as elements |
DB | |
● Number, max. | 5 999; Number range: 1 to 65535 |
● Size, max. | 5 Mbyte |
FB | |
● Number, max. | 5 998; Number range: 1 to 65535 |
● Size, max. | 512 kbyte |
FC | |
● Number, max. | 5 999; Number range: 1 to 65535 |
● Size, max. | 512 kbyte |
OB | |
● Size, max. | 1 048 kbyte |
● Number of free cycle OBs | 100 |
● Number of time alarm OBs | 20 |
● Number of delay alarm OBs | 20 |
● Number of cyclic interrupt OBs | 20 |
● Number of process alarm OBs | 50 |
● Number of DPV1 alarm OBs | 3 |
● Number of isochronous mode OBs | 1 |
● Number of technology synchronous alarm OBs | 2 |
● Number of startup OBs | 100 |
● Number of asynchronous error OBs | 4 |
● Number of synchronous error OBs | 2 |
● Number of diagnostic alarm OBs | 1 |
Nesting depth | |
● per priority class | 24 |
Counters, timers and their retentivity | |
S7 counter | |
● Number | 2 048 |
Retentivity | |
— adjustable | Yes |
IEC counter | |
● Number | Any (only limited by the main memory) |
Retentivity | |
— adjustable | Yes |
S7 times | |
● Number | 2 048 |
Retentivity | |
— adjustable | Yes |
IEC timer | |
● Number | Any (only limited by the main memory) |
Retentivity | |
— adjustable | Yes |
Data areas and their retentivity | |
Retentive data area (incl. timers, counters, flags), max. | 410 kbyte; For storage in NVRAM; for storage in mass storage 5 242 020 bytes |
Flag | |
● Size, max. | 16 kbyte |
● Number of clock memories | 8; 8 clock memory bit, grouped into one clock memory byte |
Data blocks | |
● Retentivity adjustable | Yes |
● Retentivity preset | No |
Local data | |
● per priority class, max. | 64 kbyte; max. 16 KB per block |
Address area | |
Number of IO modules | 8 192 |
I/O address area | |
● Inputs | 32 kbyte; All inputs are in the process image |
● Outputs | 32 kbyte; All outputs are in the process image |
of which per assigned PC interface | |
— Inputs (volume) | 8 kbyte |
— Outputs (volume) | 8 kbyte |
Subprocess images | |
● Number of subprocess images, max. | 32 |
Hardware configuration | |
Integrated power supply | Yes |
Number of distributed IO systems | 20 |
Number of DP masters | |
● Via CM | 1 |
Rack | |
● Modules per rack, max. | 64; CPU 1515SP PC + 64 modules + server module |
● Number of lines, max. | 1 |
PtP CM | |
● Number of PtP CMs | the number of connectable PtP CMs is only limited by the number of available slots |
Time of day | |
Clock | |
● Type | Hardware clock |
● Hardware clock (real-time) | Yes; Resolution: 1 s |
● Backup time | 6 wk; At 40 °C ambient temperature, typically |
● Deviation per day, max. | 10 s; Typ.: 2 s |
Clock synchronization | |
● supported | Yes |
● to DP, master | No |
● on Ethernet via NTP | Yes |
● on Windows clock, slave | Yes |
Interfaces | |
Number of industrial Ethernet interfaces | 2 |
Number of PROFINET interfaces | 1 |
Number of PROFIBUS interfaces | 1 |
Number of RS 485 interfaces | 1; Via CM DP module |
Number of USB interfaces | 3; 3x USB 2.0 on the front, 500 mA each – of which 2x 500 mA and 1x 100 mA simultaneously |
Number of SD card slots | 1 |
Video interfaces | |
● Graphics interface | 1x DVI-I |
1. Interface | |
Interface type | PROFINET |
automatic detection of transmission rate | Yes |
Autonegotiation | Yes |
Autocrossing | Yes |
Number of connections | 88 |
Interface types | |
● RJ 45 (Ethernet) | Yes; Via BusAdapter BA 2x RJ45 |
— Transmission rate, max. | 100 Mbit/s |
— Industrial Ethernet status LED | Yes |
● Number of ports | 2 |
● integrated switch | Yes |
● BusAdapter (PROFINET) | Yes; Applicable BusAdapter: BA 2x RJ45, BA 2x FC |
Protocols | |
● PROFINET IO Controller | Yes |
● PROFINET IO Device | Yes |
● SIMATIC communication | Yes |
● Open IE communication | Yes |
● Web server | Yes |
PROFINET IO Controller | |
Services | |
— Isochronous mode | Yes |
— shortest clock pulse | 500 µs |
— IRT | Yes |
— Prioritized startup | Yes; Max. 32 PROFINET devices |
— Number of connectable IO Devices, max. | 128 |
— Of which IO devices with IRT, max. | 64 |
— of which in line, max. | 64 |
— Number of connectable IO Devices for RT, max. | 128 |
— of which in line, max. | 128 |
— Number of IO Devices that can be simultaneously activated/ deactivated, max. | 8 |
— IO Devices changing during operation (partner ports), supported | Yes |
— Number of IO Devices per tool, max. | 8 |
— Updating times | The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data |
Update time for IRT | |
— for send cycle of 500 µs | 500 µs to 8 ms |
— for send cycle of 1 ms | 1 ms to 16 ms |
— for send cycle of 2 ms | 2 ms to 32 ms |
— for send cycle of 4 ms | 4 ms to 64 ms |
— With IRT and parameterization of “odd” send cycles | Update time = set “odd” send clock (any multiple of 125 µs: 375 µs, 625 µs … 3 875 µs) |
Update time for RT | |
— for send cycle of 500 µs | 500 µs to 256 ms |
— for send cycle of 1 ms | 1 ms to 512 ms |
— for send cycle of 2 ms | 2 ms to 512 ms |
— for send cycle of 4 ms | 4 ms to 512 ms |
PROFINET IO Device | |
Services | |
— Isochronous mode | No |
— IRT | Yes |
— Prioritized startup | Yes |
— Shared device | Yes |
— Number of IO Controllers with shared device, max. | 4 |
2. Interface | |
Interface type | Integrated Ethernet interface |
automatic detection of transmission rate | Yes |
Autonegotiation | Yes |
Autocrossing | Yes |
Interface types | |
● RJ 45 (Ethernet) | Yes; Integrated |
— Transmission rate, max. | 1 000 Mbit/s |
— Industrial Ethernet status LED | No |
● Number of ports | 1 |
3. Interface | |
Interface type | PROFIBUS with CM DP |
Number of connections | 44 |
Interface types | |
● RS 485 | Yes |
Protocols | |
● PROFIBUS DP master | Yes |
● PROFIBUS DP slave | Yes |
● SIMATIC communication | Yes |
PROFIBUS DP master | |
● Number of DP slaves, max. | 125 |
Services | |
— Equidistance | No |
— Isochronous mode | No |
Interface types | |
RS 485 | |
● Transmission rate, max. | 12 Mbit/s |
Protocols | |
PROFIsafe | No |
Number of connections | |
● Number of connections, max. | 88 |
● Number of connections reserved for ES/ HMI/ web | 10 |
● Number of S7 routing paths | 16 |
Redundancy mode | |
Media redundancy | |
— MRP | Yes |
— MRPD | Yes |
— Switchover time on line break, typ. | 200 ms |
— Number of stations in the ring, max. | 50 |
SIMATIC communication | |
● PG/OP communication | Yes |
● S7 routing | Yes |
● S7 communication, as server | Yes |
● S7 communication, as client | Yes |
● User data per job, max. | 64 kbyte |
Open IE communication | |
● TCP/IP | Yes |
— Data length, max. | 64 kbyte |
● ISO-on-TCP (RFC1006) | Yes |
— Data length, max. | 64 kbyte |
● UDP | Yes |
— Data length, max. | 1 472 kbyte |
● SNMP | Yes |
● DCP | Yes |
● LLDP | Yes |
Web server | |
● HTTP | Yes; Via Windows and PROFINET interface |
● HTTPS | Yes; Only via PROFINET interface |
OPC UA | |
● OPC UA Server | Yes; Data access (read, write, subscribe), runtime license required |
— Application authentication | Yes; Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 |
— Security policies | Yes; Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 |
— User authentication | Yes; “anonymous” or by user name & password |
Further protocols | |
● MODBUS | Yes; MODBUS TCP |
S7 message functions | |
Number of login stations for message functions, max. | 32 |
Program alarms | Yes |
Number of configurable program messages, max. | 10 000 |
Number of simultaneously active program alarms | |
● Number of program alarms | 1 000 |
● Number of alarms for system diagnostics | 200 |
● Number of alarms for motion technology objects | 160 |
Test commissioning functions | |
Joint commission (Team Engineering) | Yes; Parallel online access possible for up to 8 engineering systems |
Status block | Yes; up to 8 simultaneously |
Single step | No |
Status/ control | |
● Status/ control variable | Yes |
● Variables | Inputs, outputs, memory bits, DB, times, counters |
● Number of variables, max. | |
— of which status variables, max. | 200 |
— of which control variables, max. | 200 |
Forcing | |
● Forcing | Yes |
● Forcing, variables | Inputs, outputs |
● Number of variables, max. | 200 |
Diagnostic buffer | |
● present | Yes |
● Number of entries, max. | 1 000 |
— of which powerfail-proof | 300 |
Traces | |
● Number of configurable Traces | 4 |
● Memory size per trace, max. | 512 kbyte |
Interrupts/ diagnostics/ status information | |
Diagnostics indication LED | |
● RUN/STOP LED | Yes |
● ERROR LED | Yes |
● MAINT LED | Yes |
Supported technology objects | |
Motion Control | Yes |
● Number of available Motion Control resources for technology objects | 2 400 |
● Required Motion Control resources | |
— per speed-controlled axis | 40; per axis |
— per positioning axis | 80; per axis |
— per synchronous axis | 160; per axis |
— per external encoder | 80; per external encoder |
— per output cam | 20; per cam |
— per cam track | 160; per cam track |
— per probe | 40; per probe |
● Positioning axis | |
— Number of positioning axes at motion control cycle of 4 ms (typical value) | 5 |
— Number of positioning axes at motion control cycle of 8 ms (typical value) | 12 |
Controller | |
● PID_Compact | Yes; Universal PID controller with integrated optimization |
● PID_3Step | Yes; PID controller with integrated optimization for valves |
● PID-Temp | Yes; PID controller with integrated optimization for temperature |
Counting and measuring | |
● High-speed counter | Yes |
Standards, approvals, certificates | |
CE mark | Yes |
CSA approval | Yes |
cULus | Yes |
FM approval | Yes |
RCM (formerly C-TICK) | Yes |
Ambient conditions | |
Ambient temperature during operation | |
● min. | 0 °C |
● max. | Up to 60 °C with max. 32 ET 200SP modules and 3x 100 mA USB load; up to 55 °C with max. 64 ET 200SP modules and 2x max. 500 mA and 1x max. 100 mA USB load |
● horizontal installation, min. | 0 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | 0 °C |
● vertical installation, max. | 50 °C; With max. 32 ET 200SP modules and 3x 100 mA USB load |
Ambient temperature during storage/transportation | |
● min. | -40 °C |
● max. | 70 °C |
Vibrations | |
● Operation, tested according to IEC 60068-2-6 | Yes |
● Transport, tested acc. to IEC 60068-2-6 | Yes |
Shock testing | |
● tested according to IEC 60068-2-6 | Yes |
● tested according to IEC 60068-2-27 | Yes |
● tested according to IEC 60068-2-29 | Yes |
● Storage/transport, tested acc. to IEC 60068-2-27 | Yes |
Operating systems | |
pre-installed operating system | Windows Embedded Standard 7 P 64-bit |
configuration / header | |
configuration / programming / header | |
Programming language | |
— LAD | Yes |
— FBD | Yes |
— STL | Yes |
— SCL | Yes |
— CFC | No |
— GRAPH | Yes |
Know-how protection | |
● User program protection/ password protection | Yes |
● Copy protection | Yes |
● Block protection | Yes |
Access protection | |
● Protection level: Write protection | Yes |
● Protection level: Read/ write protection | Yes |
● Protection level: Complete protection | Yes |
programming / cycle time monitoring / header | |
● lower limit | adjustable minimum cycle time |
● upper limit | adjustable maximum cycle time |
Open Development interfaces | |
● Size of ODK SO file, max. | 3.8 Mbyte |
Peripherals/Options | |
SD card | Optionally for additional mass storage |
Distributor | UNATRO ., JSC |
Dimensions | |
Width | 160 mm |
Height | 117 mm |
Depth | 75 mm |
Weights | |
Weight, approx. | 0.83 kg |
Phân phối và báo giá CPU 1515SP PC 6ES7677-2AA41-0FB0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua bộ điều khiển mở SIMATIC ET 200SP, CPU 1515SP PC, 4GB RAM, 30GB CFAST, WES 7 P 64bit 6ES7677-2AA41-0FB0 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Tài liệu bổ sung:
- Thông số kỹ thuật/ DataSheet (PDF): Download tại đây!
- Tài liệu liên quan (Manuals, Certificates, FAQs…): Tại đây!
Đánh giá
Chưa có đánh giá nào.