6ES7317-2AK14-0AB0 – CPU 317-2 DP SIMATIC S7-300 | Siemens

Name: 6ES7317-2AK14-0AB0 - CPU 317-2 DP SIMATIC S7-300
SKU: 6ES7317-2AK14-0AB0
Price: 88770330 VND
Availability: InStock

88,770,330₫

Bộ xử lý trung tâm SIMATIC S7-300, CPU 317-2 DP với bộ nhớ làm việc 1 MB, giao diện kết nối: MPI/DP 12 Mbit/s và DP master/slave, cần có thẻ nhớ để hoạt động.

*Chú ý: dòng SIMATIC S7-300 sẽ ngừng sản xuất – phát triển (phase-out) từ ngày 01.10.2023. Bắt đầu từ khi có thông báo chính thức loại bỏ dòng này, nó sẽ được cung cấp dưới dạng sản phẩm thay thế trong khoảng thời gian 10 năm (01.10.2033). Cho nên, nếu đang có ý định xây dựng hệ thống mới, quý vị có thể tham khảo thế hệ sản phẩm SIMATIC S7-1500 hoặc dòng tương ứng.

Vui lòng liên hệ để nhận được giá tốt hơn!

Mã: 6ES7317-2AK14-0AB0 Danh mục: SIMATIC CPU S7-300, Bộ điều khiển PLC

6ES7317-2AK14-0AB0 là bộ điều khiển logic khả trình (PLC) – bộ xử lý trung tâm được hãng SIEMENS sản xuất và phát triển với thương hiệu SIMATIC thuộc dòng PLC S7-300. Bộ xử lý trung tâm SIMATIC S7-300, CPU 317-2 DP 6ES7317-2AK14-0AB0 được Công ty Cổ Phần UNATRO phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua CPU 317-2 DP 6ES7317-2AK14-0AB0 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Mô tả tóm tắt bằng tiếng Việt: Bộ xử lý trung tâm SIMATIC S7-300, CPU 317-2 DP với bộ nhớ làm việc 1 MB, giao diện kết nối: MPI/DP 12 Mbit/s và DP master/slave, cần có thẻ nhớ để hoạt động.

Mô tả tóm tắt bằng tiếng Anh: SIMATIC S7-300, CPU 317-2 DP, Central processing unit with 1 MB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface DP master/slave Micro Memory Card required.

Xem nhanh...

Bảng tóm tắt thông số kỹ thuật 6ES7317-2AK14-0AB0

Mã sản phẩm	6ES7317-2AK14-0AB0
Dòng sản phẩm	SIMATIC S7-300, CPU 317-2 DP
Hãng sản xuất	SIEMENS
Xuất xứ	Germany (Đức) / DE
Dung lượng bộ nhớ	1 MB
Nguồn cung cấp	24 V DC (19.2-28.8V DC)
Kích thước (Rộng x Cao x Sâu)	40 x 125 x 130 mm
Trọng lượng	360 g

Bảng chi tiết thông số kỹ thuật 6ES7317-2AK14-0AB0

Article number	6ES7317-2AK14-0AB0 CPU317-2 DP, 1 MB
General information
HW functional status	01
Firmware version	V3.3
Engineering with
● Programming package	STEP 7 as of V5.5 + SP1 or STEP 7 V5.2 + SP1 or higher with HSP 202
Supply voltage
Rated value (DC)	24 V
permissible range, lower limit (DC)	19.2 V
permissible range, upper limit (DC)	28.8 V
external protection for power supply lines (recommendation)	2 A min.
Mains buffering
● Mains/voltage failure stored energy time	5 ms
● Repeat rate, min.	1 s
Input current
Current consumption (rated value)	870 mA
Current consumption (in no-load operation), typ.	120 mA
Inrush current, typ.	4 A
I²t	1 A²·s
Power loss
Power loss, typ.	4.5 W
Memory
Work memory
● integrated	1 024 kbyte
● expandable	No
Load memory
● Plug-in (MMC)	Yes
● Plug-in (MMC), max.	8 Mbyte
● Data management on MMC (after last programming), min.	10 y
Backup
● present	Yes; Guaranteed by MMC (maintenance-free)
● without battery	Yes; Program and data
CPU processing times
for bit operations, typ.	0.025 µs
for word operations, typ.	0.03 µs
for fixed point arithmetic, typ.	0.04 µs
for floating point arithmetic, typ.	0.16 µs
CPU-blocks
Number of blocks (total)	2 048; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
● Number, max.	2 048; Number range: 1 to 16000
● Size, max.	64 kbyte
FB
● Number, max.	2 048; Number range: 0 to 7999
● Size, max.	64 kbyte
FC
● Number, max.	2 048; Number range: 0 to 7999
● Size, max.	64 kbyte
OB
● Number, max.	see instruction list
● Size, max.	64 kbyte
● Number of free cycle OBs	1; OB 1
● Number of time alarm OBs	1; OB 10
● Number of delay alarm OBs	2; OB 20, 21
● Number of cyclic interrupt OBs	4; OB 32, 33, 34, 35
● Number of process alarm OBs	1; OB 40
● Number of DPV1 alarm OBs	3; OB 55, 56, 57
● Number of isochronous mode OBs	1; OB 61
● Number of startup OBs	1; OB 100
● Number of asynchronous error OBs	5; OB 80, 82, 85, 86, 87
● Number of synchronous error OBs	2; OB 121, 122
Nesting depth
● per priority class	16
● additional within an error OB	4
Counters, timers and their retentivity
S7 counter
● Number	512
Retentivity
— adjustable	Yes
— lower limit	0
— upper limit	511
— preset	Z 0 to Z 7
Counting range
— lower limit	0
— upper limit	999
IEC counter
● present	Yes
● Type	SFB
● Number	Unlimited (limited only by RAM capacity)
S7 times
● Number	512
Retentivity
— adjustable	Yes
— lower limit	0
— upper limit	511
— preset	No retentivity
Time range
— lower limit	10 ms
— upper limit	9 990 s
IEC timer
● present	Yes
● Type	SFB
● Number	Unlimited (limited only by RAM capacity)
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.	256 kbyte
Flag
● Size, max.	4 096 byte
● Retentivity available	Yes; From MB 0 to MB 4 095
● Retentivity preset	MB 0 to MB 15
● Number of clock memories	8; 1 memory byte
Data blocks
● Retentivity adjustable	Yes; via non-retain property on DB
● Retentivity preset	Yes
Local data
● per priority class, max.	32 768 byte; Max. 2048 bytes per block
Address area
I/O address area
● Inputs	8 192 byte
● Outputs	8 192 byte
of which distributed
— Inputs	8 192 byte
— Outputs	8 192 byte
Process image
● Inputs	8 192 byte
● Outputs	8 192 byte
● Inputs, adjustable	8 192 byte
● Outputs, adjustable	8 192 byte
● Inputs, default	256 byte
● Outputs, default	256 byte
Subprocess images
● Number of subprocess images, max.	1
Digital channels
● Inputs	65 536
— of which central	1 024
● Outputs	65 536
— of which central	1 024
Analog channels
● Inputs	4 096
— of which central	256
● Outputs	4 096
— of which central	256
Hardware configuration
Number of expansion units, max.	3
Number of DP masters
● integrated	2
● via CP	4
Number of operable FMs and CPs (recommended)
● FM	8
● CP, PtP	8
● CP, LAN	10
Rack
● Racks, max.	4
● Modules per rack, max.	8
Time of day
Clock
● Hardware clock (real-time)	Yes
● retentive and synchronizable	Yes
● Backup time	6 wk; At 40 °C ambient temperature
● Deviation per day, max.	10 s; Typ.: 2 s
● Behavior of the clock following POWER-ON	Clock continues running after POWER OFF
● Behavior of the clock following expiry of backup period	the clock continues at the time of day it had when power was switched off
Operating hours counter
● Number	4
● Number/Number range	0 to 3
● Range of values	0 to 2^31 hours (when using SFC 101)
● Granularity	1 h
● retentive	Yes; Must be restarted at each restart
Clock synchronization
● supported	Yes
● to MPI, master	Yes
● to MPI, slave	Yes
● to DP, master	Yes; With DP slave only slave clock
● to DP, slave	Yes
● in AS, master	Yes
● in AS, slave	Yes
● on Ethernet via NTP	No
Digital inputs
Number of digital inputs	0
Digital outputs
Number of digital outputs	0
Analog inputs
Number of analog inputs	0
Analog outputs
Number of analog outputs	0
Interfaces
Number of industrial Ethernet interfaces	0
Number of PROFINET interfaces	0
Number of RS 485 interfaces	2; Combined MPI / PROFIBUS DP and PROFIBUS DP
Number of RS 422 interfaces	0
1. Interface
Interface type	Integrated RS 485 interface
Isolated	Yes
Interface types
● RS 485	Yes
● Output current of the interface, max.	200 mA
Protocols
● MPI	Yes
● PROFIBUS DP master	Yes
● PROFIBUS DP slave	Yes; A DP slave at both interfaces simultaneously is not possible
● Point-to-point connection	No
MPI
● Transmission rate, max.	12 Mbit/s
Services
— PG/OP communication	Yes
— Routing	Yes
— Global data communication	Yes
— S7 basic communication	Yes
— S7 communication	Yes; Only server, configured on one side
— S7 communication, as client	No; but via CP and loadable FB
— S7 communication, as server	Yes
PROFIBUS DP master
● Transmission rate, max.	12 Mbit/s
● Number of DP slaves, max.	124
Services
— PG/OP communication	Yes
— Routing	Yes
— Global data communication	No
— S7 basic communication	Yes; I blocks only
— S7 communication	Yes; Only server, configured on one side
— S7 communication, as client	No
— S7 communication, as server	Yes
— Equidistance	Yes
— Isochronous mode	No
— SYNC/FREEZE	Yes
— Activation/deactivation of DP slaves	Yes
— Number of DP slaves that can be simultaneously activated/deactivated, max.	8
— Direct data exchange (slave-to-slave communication)	Yes; as subscriber
— DPV1	Yes
Address area
— Inputs, max.	8 kbyte
— Outputs, max.	8 kbyte
User data per DP slave
— Inputs, max.	244 byte
— Outputs, max.	244 byte
PROFIBUS DP slave
● Transmission rate, max.	12 Mbit/s
● automatic baud rate search	Yes; only with passive interface
● Address area, max.	32
● User data per address area, max.	32 byte
Services
— PG/OP communication	Yes
— Routing	Yes; Only with active interface
— Global data communication	No
— S7 basic communication	No
— S7 communication	Yes; Only server, configured on one side
— S7 communication, as client	No
— S7 communication, as server	Yes; Connection configured on one side only
— Direct data exchange (slave-to-slave communication)	Yes
— DPV1	No
Transfer memory
— Inputs	244 byte
— Outputs	244 byte
2. Interface
Interface type	Integrated RS 485 interface
Isolated	Yes
Interface types
● RS 485	Yes
● Output current of the interface, max.	200 mA
Protocols
● MPI	No
● PROFIBUS DP master	Yes
● PROFIBUS DP slave	Yes; A DP slave at both interfaces simultaneously is not possible
● Point-to-point connection	No
PROFIBUS DP master
● Transmission rate, max.	12 Mbit/s
● Number of DP slaves, max.	124
Services
— PG/OP communication	Yes
— Routing	Yes
— Global data communication	No
— S7 basic communication	Yes; I blocks only
— S7 communication	Yes; Only server, configured on one side
— S7 communication, as client	No; but via CP and loadable FB
— S7 communication, as server	Yes
— Equidistance	Yes
— Isochronous mode	Yes; OB 61
— SYNC/FREEZE	Yes
— Activation/deactivation of DP slaves	Yes
— Number of DP slaves that can be simultaneously activated/deactivated, max.	8
— Direct data exchange (slave-to-slave communication)	Yes; as subscriber
— DPV1	Yes
Address area
— Inputs, max.	8 192 byte
— Outputs, max.	8 192 byte
User data per DP slave
— Inputs, max.	244 byte
— Outputs, max.	244 byte
PROFIBUS DP slave
● GSD file	The latest GSD file is available on the Internet (http://www.siemens.com/profibus-gsd)
● Transmission rate, max.	12 Mbit/s
● automatic baud rate search	Yes; only with passive interface
● Address area, max.	32
● User data per address area, max.	32 byte
Services
— PG/OP communication	Yes
— Routing	Yes; Only with active interface
— Global data communication	No
— S7 basic communication	No
— S7 communication	Yes; Only server, configured on one side
— S7 communication, as client	No; but via CP and loadable FB
— S7 communication, as server	Yes
— Direct data exchange (slave-to-slave communication)	Yes
— DPV1	No
Transfer memory
— Inputs	244 byte
— Outputs	244 byte
Protocols
PROFIsafe	No
communication functions / header
PG/OP communication	Yes
Data record routing	Yes
Global data communication
● supported	Yes
● Number of GD loops, max.	8
● Number of GD packets, max.	8
● Number of GD packets, transmitter, max.	8
● Number of GD packets, receiver, max.	8
● Size of GD packets, max.	22 byte
● Size of GD packet (of which consistent), max.	22 byte
S7 basic communication
● supported	Yes
● User data per job, max.	76 byte
● User data per job (of which consistent), max.	76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
● supported	Yes
● as server	Yes
● as client	Yes; Via CP and loadable FB
● User data per job, max.	See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication)
S5 compatible communication
● supported	Yes; via CP and loadable FC
Number of connections
● overall	32
● usable for PG communication	31
— reserved for PG communication	1
— adjustable for PG communication, min.	1
— adjustable for PG communication, max.	31
● usable for OP communication	31
— reserved for OP communication	1
— adjustable for OP communication, min.	1
— adjustable for OP communication, max.	31
● usable for S7 basic communication	30
— reserved for S7 basic communication	0
— adjustable for S7 basic communication, min.	0
— adjustable for S7 basic communication, max.	30
● usable for routing	X1 as a MPI, max. 10; X1 as DP Master max. 24; X1 as DP Slave (active) max. 14; X2 as DP Master max. 24; X2 as DP Slave (active) max. 14
S7 message functions
Number of login stations for message functions, max.	32; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages	Yes
simultaneously active Alarm-S blocks, max.	300
Test commissioning functions
Status block	Yes; Up to 2 simultaneously
Single step	Yes
Number of breakpoints	4
Status/control
● Status/control variable	Yes
● Variables	Inputs, outputs, memory bits, DB, times, counters
● Number of variables, max.	30
— of which status variables, max.	30
— of which control variables, max.	14
Forcing
● Forcing	Yes
● Forcing, variables	Inputs, outputs
● Number of variables, max.	10
Diagnostic buffer
● present	Yes
● Number of entries, max.	500
— adjustable	No
— of which powerfail-proof	100; Only the last 100 entries are retained
● Number of entries readable in RUN, max.	499
— adjustable	Yes; From 10 to 499
— preset	10
Service data
● can be read out	Yes
Ambient conditions
Ambient temperature during operation
● min.	0 °C
● max.	60 °C
configuration / header
Configuration software
● STEP 7	Yes; STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203
● STEP 7 Lite	No
configuration / programming / header
● Command set	see instruction list
● Nesting levels	8
● System functions (SFC)	see instruction list
● System function blocks (SFB)	see instruction list
Programming language
— LAD	Yes
— FBD	Yes
— STL	Yes
— SCL	Yes
— CFC	Yes
— GRAPH	Yes
— HiGraph®	Yes
Know-how protection
● User program protection/password protection	Yes
● Block encryption	Yes; With S7 block Privacy
Distributor	UNATRO ., JSC
Dimensions
Width	40 mm
Height	125 mm
Depth	130 mm
Weights
Weight, approx.	360 g

Phân phối và báo giá CPU 317-2 DP 6ES7317-2AK14-0AB0

Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua bộ xử lý trung tâm SIMATIC S7-300, CPU 317-2 DP 6ES7317-2AK14-0AB0 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Tài liệu bổ sung: