6ES7134-6JD00-0DA1 là mô-đun mở rộng đầu vào tương tự (analog input module) được hãng SIEMENS sản xuất và phát triển với thương hiệu SIMATIC thuộc dòng ET 200SP. Mô-đun mở rộng đầu vào tương tự SIMATIC ET 200SP, AI 4xTC High Speed 6ES7134-6JD00-0DA1 được Công ty Cổ Phần UNATRO phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua AI 4xTC HS 6ES7134-6JD00-0DA1 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mô tả tóm tắt bằng tiếng Việt: Mô-đun mở rộng đầu vào tương tự SIMATIC ET 200SP, AI 4xTC High Speed, phù hợp cho BU loại A0, A1; mã màu CC00, chuẩn đoán kênh, 16 bit, +/-0.1%.
Mô tả tóm tắt bằng tiếng Anh: SIMATIC ET 200SP, Analog input module, AI 4xTC High Speed, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.1%.
Xem nhanh...
Bảng tóm tắt thông số kỹ thuật 6ES7134-6JD00-0DA1
| Mã sản phẩm | 6ES7134-6JD00-0DA1 |
| Dòng sản phẩm | SIMATIC ET 200SP, AI 4xTC HS |
| Hãng sản xuất | SIEMENS |
| Xuất xứ | Germany (Đức) / DE |
| Số lượng đầu vào analog | AI 4xTC |
| Nguồn cung cấp | 24 V DC (19.2 – 28.8 V DC) |
| Kích thước (Rộng x Cao x Sâu) | 15 x 73 x 58 mm |
| Trọng lượng | 33 g |
Bảng chi tiết thông số kỹ thuật 6ES7134-6JD00-0DA1
| Article number | 6ES7134-6JD00-0DA1
ET 200SP, AI 4x TC HS |
| General information | |
| Product type designation | AI 4xTC HS |
| HW functional status | From FS02 |
| Firmware version | |
| ● FW update possible | Yes |
| usable BaseUnits | BU type A0, A1 |
| Color code for module-specific color identification plate | CC00 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| ● Measuring range scalable | Yes |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/ integrated from version | V15 with HSP 265/integrated as of V15.1 |
| ● STEP 7 configurable/ integrated from version | V5.5 SP3 or higher |
| ● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| ● PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Operating mode | |
| ● Oversampling | No |
| ● MSI | Yes |
| CiR – Configuration in RUN | |
| Reparameterization possible in RUN | Yes |
| Calibration possible in RUN | Yes |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Input current | |
| Current consumption (rated value) | 37 mA |
| Current consumption, max. | 50 mA |
| Power loss | |
| Power loss, typ. | 0.9 W |
| Address area | |
| Address space per module | |
| ● Address space per module, max. | 16 byte; + 1 byte for QI information |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | Type A |
| Selection of BaseUnit for connection variants | |
| ● 2-wire connection | BU type A0, A1 |
| Analog inputs | |
| Number of analog inputs | 4 |
| permissible input voltage for voltage input (destruction limit), max. | 30 V |
| Cycle time (all channels), min. | 5 ms; Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels) |
| Technical unit for temperature measurement adjustable | Yes; °C/°F/K |
| Input ranges (rated values), voltages | |
| ● -1 V to +1 V | Yes; 16 bit incl. sign |
| — Input resistance (-1 V to +1 V) | 1 MΩ |
| ● -250 mV to +250 mV | Yes; 16 bit incl. sign |
| — Input resistance (-250 mV to +250 mV) | 1 MΩ |
| ● -50 mV to +50 mV | Yes; 16 bit incl. sign |
| — Input resistance (-50 mV to +50 mV) | 1 MΩ |
| ● -80 mV to +80 mV | Yes; 16 bit incl. sign |
| — Input resistance (-80 mV to +80 mV) | 1 MΩ |
| Input ranges (rated values), thermocouples | |
| ● Type B | Yes; 16 bit incl. sign |
| — Input resistance (Type B) | 1 MΩ |
| ● Type C | Yes; 16 bit incl. sign |
| — Input resistance (Type C) | 1 MΩ |
| ● Type E | Yes; 16 bit incl. sign |
| — Input resistance (Type E) | 1 MΩ |
| ● Type J | Yes; 16 bit incl. sign |
| — Input resistance (type J) | 1 MΩ |
| ● Type K | Yes; 16 bit incl. sign |
| — Input resistance (Type K) | 1 MΩ |
| ● Type L | Yes; 16 bit incl. sign |
| — Input resistance (Type L) | 1 MΩ |
| ● Type N | Yes; 16 bit incl. sign |
| — Input resistance (Type N) | 1 MΩ |
| ● Type R | Yes; 16 bit incl. sign |
| — Input resistance (Type R) | 1 MΩ |
| ● Type S | Yes; 16 bit incl. sign |
| — Input resistance (Type S) | 1 MΩ |
| ● Type T | Yes; 16 bit incl. sign |
| — Input resistance (Type T) | 1 MΩ |
| ● Type U | Yes; 16 bit incl. sign |
| — Input resistance (Type U) | 1 MΩ |
| ● Type TXK/TXK(L) to GOST | Yes; 16 bit incl. sign |
| — Input resistance (Type TXK/TXK(L) to GOST) | 1 MΩ |
| Thermocouple (TC) | |
| Temperature compensation | |
| — parameterizable | Yes |
| — Reference channel of the module | No |
| — internal comparison point | Yes; with BaseUnit type A1 |
| — Reference channel of the group | Yes |
| — Number of reference channel groups | 4; Group 0 to 3 |
| — fixed reference temperature | Yes |
| Cable length | |
| ● shielded, max. | 200 m; 100 m for thermocouples |
| Analog value generation for the inputs | |
| Measurement principle | integrating (Sigma-Delta) |
| Integration and conversion time/resolution per channel | |
| ● Resolution with overrange (bit including sign), max. | 16 bit |
| ● Integration time, parameterizable | Yes |
| ● Basic conversion time, including integration time (ms) | |
| — additional processing time for wire-break check | 1 ms |
| ● Interference voltage suppression for interference frequency f1 in Hz | 16.6 / 50 / 60 Hz / off |
| ● Conversion time (per channel) | 180/60/50/1.25 ms |
| Smoothing of measured values | |
| ● Number of smoothing levels | 4; None; 4/8/16 times |
| ● parameterizable | Yes |
| ● Step: None | Yes |
| ● Step: low | Yes |
| ● Step: Medium | Yes |
| ● Step: High | Yes |
| Encoder | |
| Connection of signal encoders | |
| ● for voltage measurement | Yes |
| Errors/accuracies | |
| Linearity error (relative to input range), (+/-) | 0.01 % |
| Temperature error (relative to input range), (+/-) | 0.005 %/K |
| Crosstalk between the inputs, min. | -70 dB |
| Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.03 % |
| Operational error limit in overall temperature range | |
| ● Voltage, relative to input range, (+/-) | 0.1 %; 0.3 % when SFU OFF |
| Basic error limit (operational limit at 25 °C) | |
| ● Voltage, relative to input range, (+/-) | 0.05 %; 0.2 % when SFU OFF |
| Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency | |
| ● Series mode interference (peak value of interference < rated value of input range), min. | 70 dB |
| ● Common mode voltage, max. | 60 V; DC |
| ● Common mode interference, min. | 90 dB |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Alarms | |
| ● Diagnostic alarm | Yes |
| ● Limit value alarm | Yes; two upper and two lower limit values in each case |
| Diagnoses | |
| ● Monitoring the supply voltage | Yes |
| ● Wire-break | Yes; channel by channel |
| ● Group error | Yes |
| ● Overflow/underflow | Yes; channel by channel |
| Diagnostics indication LED | |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| ● Channel status display | Yes; green LED |
| ● for channel diagnostics | Yes; red LED |
| ● for module diagnostics | Yes; green/red LED |
| Potential separation | |
| Potential separation channels | |
| ● between the channels | No |
| ● between the channels and backplane bus | Yes |
| ● between the channels and the power supply of the electronics | Yes |
| Permissible potential difference | |
| between the inputs (UCM) | 60 V DC |
| Isolation | |
| Isolation tested with | 707 V DC (type test) |
| Standards, approvals, certificates | |
| Suitable for applications according to AMS 2750 | Yes; Declaration of Conformity, see online support entry 109757262 |
| Suitable for applications according to CQI-9 | Yes; Based on AMS 2750 E |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● horizontal installation, min. | -30 °C; < 0 °C as of FS02 |
| ● horizontal installation, max. | 60 °C |
| ● vertical installation, min. | -30 °C; < 0 °C as of FS02 |
| ● vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level | |
| ● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Distributor | UNATRO ., JSC |
| Dimensions | |
| Width | 15 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weights | |
| Weight, approx. | 33 g |
Phân phối và báo giá AI 4xTC HS 6ES7134-6JD00-0DA1
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua mô-đun mở rộng đầu vào tương tự SIMATIC ET 200SP, AI 4xTC High Speed 6ES7134-6JD00-0DA1 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Tài liệu bổ sung:
- Thông số kỹ thuật/ DataSheet (PDF): Download tại đây!
- Tài liệu liên quan (Manuals, Certificates, FAQs…): Tại đây!
Đánh giá
Chưa có đánh giá nào.