6EP3324-7SB00-3AX0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP thuộc dòng PSU6200. 6EP3324-7SB00-3AX0 được Công ty Cổ Phần UNATRO phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua SITOP PSU6200 6EP3324-7SB00-3AX0 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mô tả tóm tắt bằng tiếng Việt: Bộ cung cấp nguồn ổn định SITOP PSU6200 12 V/12 A; đầu vào: 120 – 230 V AC, (120 – 240 V DC), đầu ra: 12 V DC/12 A với giao diện chuẩn đoán.
Mô tả tóm tắt bằng tiếng Anh: SITOP PSU6200 12 V/12 A Stabilized power supply Input: 120 – 230 V AC, (120 – 240 V DC) Output: 12 V DC/12 A with diagnostics interface.
Xem nhanh...
Bảng tóm tắt thông số kỹ thuật SITOP PSU6200 6EP3324-7SB00-3AX0
| Mã sản phẩm | 6EP3324-7SB00-3AX0 |
| Dòng sản phẩm | SITOP PSU6200 |
| Hãng sản xuất | SIEMENS |
| Xuất xứ | Austria (Áo) / AT |
| Nguồn đầu vào | 120 – 230 V AC, (120 – 240 V DC) |
| Nguồn đầu ra | 12 V DC/12 A |
| Kích thước (Rộng x Cao x Sâu) | 45 x 135 x 125 mm |
| Trọng lượng | 900 g |
Bảng chi tiết thông số kỹ thuật SITOP PSU6200 6EP3324-7SB00-3AX0
| Article number | 6EP3324-7SB00-3AX0
SITOP PSU6200/ 1AC/ 12VDC/ 12A |
| Input | |
| Input | 1-phase AC or DC |
| Rated voltage value Vin rated | 120 … 230 V |
| Voltage range AC | 85 … 264 V |
| supply voltage | |
| ● at DC | 110 … 240 V |
| input voltage | |
| ● at DC | 85 … 275 V |
| Wide-range input | Yes |
| Overvoltage resistance | 300 V AC for 30 s |
| Mains buffering | at Vin = 230 V |
| Mains buffering at Iout rated, min. | 70 ms; at Vin = 230 V |
| Rated line frequency 1 | 50 Hz |
| Rated line frequency 2 | 60 Hz |
| Rated line range | 47 … 63 Hz |
| input current | |
| ● at rated input voltage 120 V | 1.4 A |
| ● at rated input voltage 230 V | 0.8 A |
| Switch-on current limiting (+25 °C), max. | 6 A |
| Built-in incoming fuse | 5 A |
| Protection in the mains power input (IEC 898) | Circuit breaker from 4 A characteristic C/6 A characteristic B to 10 A characteristic C or circuit breaker 3RV2011-1EA10 (setting 4 A) or 3RV2711-1ED10 (UL 489) |
| Output | |
| Output | Controlled, isolated DC voltage |
| number of outputs | 1 |
| Rated voltage Vout DC | 12 V |
| ● output voltage at output 1 at DC rated value | 12 V |
| Total tolerance, static ± | 3 % |
| Static mains compensation, approx. | 0.1 % |
| Static load balancing, approx. | 0.1 % |
| Residual ripple peak-peak, max. | 30 mV |
| Residual ripple peak-peak, typ. | 20 mV |
| Spikes peak-peak, max. (bandwidth: 20 MHz) | 30 mV |
| Spikes peak-peak, typ. (bandwidth: 20 MHz) | 20 mV |
| Adjustment range | 12 … 15.5 V |
| product function output voltage adjustable | Yes |
| Output voltage setting | via potentiometer; max. 144 W (173 W up to 45°C) |
| Status display | Green LED for 24 V OK |
| Signaling | Electronic contact (NO contact, contact rating 30 V DC/0.1 A) for DC O.K. or diagnostic interface |
| On/off behavior | Overshoot of Vout < 2 % |
| Startup delay, max. | 0.5 s |
| Voltage rise, typ. | 100 ms |
| Rated current value Iout rated | 12 A |
| Current range | 0 … 12 A |
| ● Note | 14.4 A up to +45°C; +60 … +70 °C: Derating 3%/K |
| supplied active power typical | 144 W |
| short-term overload current | |
| ● on short-circuiting during the start-up typical | 14.4 A |
| ● at short-circuit during operation typical | 14.4 A |
| Parallel switching for enhanced performance | Yes; switchable characteristic |
| Numbers of parallel switchable units for enhanced performance | 2 |
| Efficiency | |
| Efficiency at Vout rated, Iout rated, approx. | 89.3 % |
| Power loss at Vout rated, Iout rated, approx. | 17 W |
| power loss [W] during no-load operation maximum | 3 W |
| Closed-loop control | |
| Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. | 3 % |
| Load step setting time 10 to 90%, typ. | 2 ms |
| Load step setting time 90 to 10%, typ. | 2 ms |
| setting time maximum | 3 ms |
| Protection and monitoring | |
| Output overvoltage protection | < 20 V |
| Current limitation, typ. | 14.4 A |
| property of the output short-circuit proof | Yes |
| Short-circuit protection | Shutdown and periodic restart attempts |
| overcurrent overload capability in normal operation | overload capability 150 % Iout rated up to 5 s/min |
| Safety | |
| Primary/secondary isolation | Yes |
| galvanic isolation | Safety extra low output voltage Vout according to EN 60950-1 |
| Protection class | Class I |
| leakage current | |
| ● maximum | 3.5 mA |
| Degree of protection (EN 60529) | IP20 |
| Approvals | |
| CE mark | Yes |
| UL/cUL (CSA) approval | cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1) |
| certificate of suitability NEC Class 2 | No |
| CB approval | Yes |
| certificate of suitability EAC approval | Yes |
| Regulatory Compliance Mark (RCM) | No |
| Marine approval | in process: DNV GL, ABS |
| EMC | |
| Emitted interference | EN 55022 Class B |
| Supply harmonics limitation | EN 61000-3-2 |
| Noise immunity | EN 61000-6-2 |
| environmental conditions | |
| ambient temperature | |
| ● during operation | -30 … +70 °C |
| — Note | with natural convection a monotonically increasing start-up from -25 °C, safe start-up from -40 °C |
| ● during transport | -40 … +85 °C |
| ● during storage | -40 … +85 °C |
| Humidity class according to EN 60721 | Climate class 3K3, 5 … 95% no condensation |
| Mechanics | |
| Connection technology | Push-in terminals |
| Connections | |
| ● Supply input | L1/+, L2/N/-, PE:PushIn for 0.5 … 4 mm² single-core/finely stranded |
| ● Output | +1, +2, -1, -2, -3: PushIn for 0.5 … 2.5 mm² |
| ● Auxiliary | 13, 14 (alarm signal): 1 push-in terminal each for 0.2 … 1.5 mm² |
| Distributor | UNATRO.,JSC |
| width of the enclosure | 45 mm |
| height of the enclosure | 135 mm |
| depth of the enclosure | 125 mm |
| required spacing | |
| ● top | 45 mm |
| ● bottom | 45 mm |
| ● left | 0 mm |
| ● right | 0 mm |
| Weight, approx. | 0.9 kg |
| product feature of the enclosure housing can be lined up | Yes |
| Installation | Snaps onto DIN rail EN 60715 35×7.5/15 |
| electrical accessories | Redundancy module |
| mechanical accessories | Identification labels SIMATIC ET 200SP 6ES7193-6LF30-0AW0 |
| other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
Phân phối và báo giá SITOP PSU6200 6EP3324-7SB00-3AX0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3324-7SB00-3AX0 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Đánh giá
Chưa có đánh giá nào.