6EP3320-6SB00-0AY0 là mô đun cấp nguồn cho LOGO! được hãng SIEMENS sản xuất và phát triển. Mô đun cung cấp nguồn ổn định LOGO!POWER 12 V / 0.9 A 6EP3320-6SB00-0AY0 được UNATRO.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua LOGO!POWER 12 V / 0.9 A 6EP3320-6SB00-0AY0 thì hãy liên hệ Công ty Cổ Phần UNATRO để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mô tả tóm tắt bằng tiếng việt: Mô đun cung cấp nguồn ổn định LOGO!POWER 12 V / 0.9 A; đầu vào: 100-240 V AC, đầu ra: 12 V DC/ 0.9 A.
Mô tả tóm tắt bằng tiếng anh: LOGO!POWER 12 V / 0.9 A Stabilized power supply input: 100-240 V AC output: 12 V DC/ 0.9 A.
Bảng tóm tắt thông số kỹ thuật LOGO!POWER 6EP3320-6SB00-0AY0
Mã sản phẩm | 6EP3320-6SB00-0AY0 |
Dòng sản phẩm | LOGO!POWER |
Hãng sản xuất | SIEMENS |
Xuất xứ | Austria (Áo) / AT |
Nguồn đầu vào | 100-240 V AC hoặc 110-300 V DC |
Nguồn đầu ra | 12 V DC/ 0.9 A |
Kích thước (Rộng x Cao x Sâu) | 18 x 90 x 53 mm |
Trọng lượng | 70 g |
Bảng chi tiết thông số kỹ thuật LOGO!POWER 6EP3320-6SB00-0AY0
Article number | 6EP3320-6SB00-0AY0
LOGO!Power/ 1AC/ 12VDC/ 0.9A |
Input | |
Input | 1-phase AC or DC |
Rated voltage value Vin rated | 100 … 240 V |
Voltage range AC | 85 … 264 V |
input voltage | |
● at DC | 110 … 300 V |
Wide-range input | Yes |
Overvoltage resistance | 300 V AC for 1 s |
Mains buffering | at Vin = 187 V |
Mains buffering at Iout rated, min. | 40 ms; at Vin = 187 V |
Rated line frequency 1 | 50 Hz |
Rated line frequency 2 | 60 Hz |
Rated line range | 47 … 63 Hz |
input current | |
● at rated input voltage 120 V | 0.3 A |
● at rated input voltage 230 V | 0.2 A |
Switch-on current limiting (+25 °C), max. | 20 A |
I²t, max. | 0.8 A²·s |
Built-in incoming fuse | internal |
Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker: from 6 A characteristic B or from 2 A characteristic C |
Output | |
Output | Controlled, isolated DC voltage |
Rated voltage Vout DC | 12 V |
● output voltage at output 1 at DC rated value | 12 V |
Total tolerance, static ± | 3 % |
Static mains compensation, approx. | 0.1 % |
Static load balancing, approx. | 0.1 % |
Residual ripple peak-peak, max. | 200 mV |
Residual ripple peak-peak, typ. | 30 mV |
Spikes peak-peak, max. (bandwidth: 20 MHz) | 300 mV |
Spikes peak-peak, typ. (bandwidth: 20 MHz) | 50 mV |
product function output voltage adjustable | No |
Status display | Green LED for output voltage OK |
On/off behavior | No overshoot of Vout (soft start) |
Startup delay, max. | 0.5 s |
Voltage rise, typ. | 100 ms |
Rated current value Iout rated | 0.9 A |
Current range | 0 … 0.9 A |
● Note | +55 … +70 °C: Derating 2%/K |
supplied active power typical | 10.8 W |
Parallel switching for enhanced performance | No |
Efficiency | |
Efficiency at Vout rated, Iout rated, approx. | 78 % |
Power loss at Vout rated, Iout rated, approx. | 3 W |
power loss [W] during no-load operation maximum | 0.3 W |
Closed-loop control | |
Dynamic mains compensation (Vin rated ±15 %), max. | 0.2 % |
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. | 3 % |
Load step setting time 10 to 90%, typ. | 1 ms |
Load step setting time 90 to 10%, typ. | 1 ms |
Protection and monitoring | |
Output overvoltage protection | Yes, according to EN 60950-1 |
Current limitation, typ. | 1.3 A |
property of the output short-circuit proof | Yes |
Short-circuit protection | Constant current characteristic |
enduring short circuit current RMS value | |
● maximum | 1.3 A |
overcurrent overload capability in normal operation | overload capability 150% Iout rated typ. 200 ms |
Overload/short-circuit indicator | – |
overcurrent overload capability when switching on | 150% Iout rated typ. 200 ms |
Safety | |
Primary/secondary isolation | Yes |
galvanic isolation | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 |
Protection class | Class II (without protective conductor) |
Degree of protection (EN 60529) | IP20 |
Approvals | |
CE mark | Yes |
UL/cUL (CSA) approval | cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273, NEC class 2 (acc. to UL 1310) |
certificate of suitability NEC Class 2 | Yes |
CB approval | Yes |
certificate of suitability EAC approval | Yes |
Marine approval | ABS, BV, DNV GL, LRS |
EMC | |
Emitted interference | EN 55022 Class B |
Supply harmonics limitation | not applicable |
Noise immunity | EN 61000-6-2 |
environmental conditions | |
ambient temperature | |
● during operation | -25 … +70 °C |
— Note | with natural convection |
● during transport | -40 … +85 °C |
● during storage | -40 … +85 °C |
Humidity class according to EN 60721 | Climate class 3K3, 5 … 95% no condensation |
Mechanics | |
Connection technology | screw-type terminals |
Connections | |
● Supply input | L, N: 1 screw terminal each for 0.5 … 2.5 mm2 single-core/finely stranded |
● Output | +, -: 1 screw terminal each for 0.5 … 2.5 mm² |
● Auxiliary | – |
width of the enclosure | 18 mm |
height of the enclosure | 90 mm |
depth of the enclosure | 53 mm |
required spacing | |
● top | 20 mm |
● bottom | 20 mm |
● left | 0 mm |
● right | 0 mm |
Weight, approx. | 0.07 kg |
Distributor | UNATRO ., JSC |
product feature of the enclosure housing can be lined up | Yes |
Installation | Snaps onto DIN rail EN 60715 35×7.5/15, direct mounting in different mounting positions |
MTBF at 40 °C | 3 793 080 h |
other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
Phân phối và báo giá LOGO!POWER 6EP3320-6SB00-0AY0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua Mô đun cung cấp nguồn ổn định LOGO!POWER 12 V / 0.9 A 6EP3320-6SB00-0AY0 thì hãy liên hệ Công ty Cổ Phần UNATRO để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Tài liệu bổ sung:
- Thông số kỹ thuật/ DataSheet (PDF): Download tại đây!
- Tài liệu liên quan (Manuals, Certificates, FAQs…): Tại đây!
Đánh giá
Chưa có đánh giá nào.