6ES7135-6TD00-0CA1 là mô-đun mở rộng đầu ra tương tự (analog output module) được hãng SIEMENS sản xuất và phát triển với thương hiệu SIMATIC thuộc dòng ET 200SP. Mô-đun mở rộng đầu ra tương tự (HART) SIMATIC ET 200SP, AQ 4xI HART High Feature 6ES7135-6TD00-0CA1 được Công ty Cổ Phần UNATRO phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua AQ 4xI HART HF 6ES7135-6TD00-0CA1 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mô tả tóm tắt bằng tiếng Việt: Mô-đun mở rộng đầu ra tương tự (HART) SIMATIC ET 200SP, AQ 4xI HART High Feature, phù hợp cho BU loại A0, A1; mã màu CC00, chuẩn đoán kênh, 16 bit, +/-0.3%.
Mô tả tóm tắt bằng tiếng Anh: SIMATIC ET 200SP, analog HART output module, AQ 4xI HART High Feature, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.3%.
Xem nhanh...
Bảng tóm tắt thông số kỹ thuật 6ES7135-6TD00-0CA1
Mã sản phẩm | 6ES7135-6TD00-0CA1 |
Dòng sản phẩm | SIMATIC ET 200SP, AQ 4xI HART HF |
Hãng sản xuất | SIEMENS |
Xuất xứ | Germany (Đức) / DE |
Số lượng đầu ra tương tự | AQ 4xI HART |
Nguồn cung cấp | 24 V DC (19.2 – 28.8 V DC) |
Kích thước (Rộng x Cao x Sâu) | 15 x 73 x 58 mm |
Trọng lượng | 31 g |
Bảng chi tiết thông số kỹ thuật 6ES7135-6TD00-0CA1
Article number | 6ES7135-6TD00-0CA1
ET 200SP, AQ 4xI HART HF |
General information | |
Product type designation | AQ 4xI HART HF |
Firmware version | V1.0 |
● FW update possible | Yes |
usable BaseUnits | BU type A0, A1 |
Color code for module-specific color identification plate | CC00 |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
Engineering with | |
● STEP 7 TIA Portal configurable/ integrated from version | V15 SP1 |
● STEP 7 configurable/ integrated from version | V5.6 and higher |
● PCS 7 configurable/ integrated from version | V9.0 SP1 |
● PROFIBUS from GSD version/GSD revision | V04.02.14 |
● PROFINET from GSD version/GSD revision | GSDML V2.34 |
CiR – Configuration in RUN | |
Reparameterization possible in RUN | Yes |
Calibration possible in RUN | No |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current | |
Current consumption (rated value) | 115 mA |
Current consumption, max. | 125 mA |
Power loss | |
Power loss, typ. | 1.7 W |
Address area | |
Address space per module | |
● Address space per module, max. | 8 byte; + 1 byte for QI information |
● Address space per module with HART, max. | 28 byte; + 1 byte for QI information |
Analog outputs | |
Number of analog outputs | 4 |
Current output, no-load voltage, max. | 28 V |
Cycle time (all channels), min. | 3 ms |
Output ranges, current | |
● 0 to 20 mA | Yes; 16 bit incl. sign |
● -20 mA to +20 mA | No |
● 4 mA to 20 mA | Yes; 16 bit incl. sign |
Connection of actuators | |
● for current output two-wire connection | Yes |
Load impedance (in rated range of output) | |
● with current outputs, max. | 750 Ω |
● with current outputs, inductive load, max. | 10 mH |
Destruction limits against externally applied voltages and currents | |
● Voltages at the outputs | 30 V |
Cable length | |
● shielded, max. | 800 m |
Analog value generation for the outputs | |
Settling time | |
● for resistive load | 2 ms; 750 ohm |
● for capacitive load | 2 ms |
● for inductive load | 2 ms |
Errors/accuracies | |
Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-) | 0.02 % |
Linearity error (relative to output range), (+/-) | 0.03 % |
Temperature error (relative to output range), (+/-) | 0.003 %/K |
Crosstalk between the outputs, min. | -50 dB |
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-) | 0.03 % |
Operational error limit in overall temperature range | |
● Current, relative to output range, (+/-) | 0.3 %; 0 … 60 °C: 0.2 % |
Basic error limit (operational limit at 25 °C) | |
● Current, relative to output range, (+/-) | 0.1 % |
Protocols | |
HART protocol | Yes |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Substitute values connectable | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnoses | |
● Monitoring the supply voltage | Yes; Module-wise |
● Wire-break | Yes; channel by channel |
● Short-circuit | Yes |
● Overflow/underflow | Yes; channel by channel |
Diagnostics indication LED | |
● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
● Channel status display | Yes; green LED |
● for channel diagnostics | Yes; red LED |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● Between the channels and load voltage L+ | Yes |
Permissible potential difference | |
between different circuits | 60 V DC/30 V AC |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | -30 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | -30 °C |
● vertical installation, max. | 50 °C |
Altitude during operation relating to sea level | |
● Installation altitude above sea level, max. | 5 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual |
Distributor | UNATRO ., JSC |
Dimensions | |
Width | 15 mm |
Height | 73 mm |
Depth | 58 mm |
Weights | |
Weight, approx. | 31 g |
Phân phối và báo giá AQ 4xI HART HF 6ES7135-6TD00-0CA1
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua mô-đun mở rộng đầu ra tương tự (HART) SIMATIC ET 200SP, AQ 4xI HART High Feature 6ES7135-6TD00-0CA1 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Tài liệu bổ sung:
- Thông số kỹ thuật/ DataSheet (PDF): Download tại đây!
- Tài liệu liên quan (Manuals, Certificates, FAQs…): Tại đây!
Đánh giá
Chưa có đánh giá nào.