6EP7133-6AB00-0BN0 là bộ cung cấp nguồn ổn định cho các thiết bị SIMATIC ET 200SP được hãng SIEMENS sản xuất và phát triển với thương hiệu SIMATIC thuộc dòng ET 200SP. Mô-đun cung cấp nguồn ổn định SIMATIC ET 200SP, PS 24V/5A 6EP7133-6AB00-0BN0 được Công ty Cổ Phần UNATRO phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua PS 24V/5A 6EP7133-6AB00-0BN0 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mô tả tóm tắt bằng tiếng Việt: Mô-đun cung cấp nguồn ổn định SIMATIC ET 200SP, PS 24V/5A; đầu vào: 120/230 V AC, đầu ra: 24 V DC/5 A.
Mô tả tóm tắt bằng tiếng Anh: SIMATIC ET 200SP PS 24V/5A Stabilized power supply Input: 120/230 V AC Output: 24 V DC/5 A.
Xem nhanh...
Bảng tóm tắt thông số kỹ thuật 6EP7133-6AB00-0BN0
| Mã sản phẩm | 6EP7133-6AB00-0BN0 |
| Dòng sản phẩm | SIMATIC ET 200SP PS |
| Hãng sản xuất | SIEMENS |
| Xuất xứ | Romania (Rumani) / RO |
| Nguồn đầu vào | 120/230 V AC |
| Nguồn đầu ra | 24 V DC/5 A |
| Kích thước (Rộng x Cao x Sâu) | 160 x 117 x 74 mm |
| Trọng lượng | 500 g |
Bảng chi tiết thông số kỹ thuật 6EP7133-6AB00-0BN0
| Article number | 6EP7133-6AB00-0BN0
SIMATIC ET 200SP PS/ 1AC/ 24VDC/ 5A |
| Input | |
| Input | 1-phase AC |
| ● Note | Automatic range selection |
| supply voltage | |
| ● 1 at AC rated value | 120 V |
| ● 2 at AC rated value | 230 V |
| input voltage | |
| ● 1 at AC | 85 … 132 V |
| ● 2 at AC | 170 … 264 V |
| Wide-range input | No |
| Overvoltage resistance | 2.3 × Vin rated, 1.3 ms |
| Mains buffering | at Vin = 93/187 V |
| Mains buffering at Iout rated, min. | 20 ms; at Vin = 93/187 V |
| Rated line frequency 1 | 50 Hz |
| Rated line frequency 2 | 60 Hz |
| Rated line range | 47 … 63 Hz |
| input current | |
| ● at rated input voltage 120 V | 2.16 A |
| ● at rated input voltage 230 V | 1.22 A |
| Switch-on current limiting (+25 °C), max. | 45 A |
| I²t, max. | 3.15 A²·s |
| Built-in incoming fuse | T 3,15 A/250 V (not accessible) |
| Protection in the mains power input (IEC 898) | recommended LS switch: B/C 6 A/3 A |
| Output | |
| Output | Controlled, isolated DC voltage |
| Rated voltage Vout DC | 24 V |
| ● output voltage at output 1 at DC rated value | 24 V |
| Total tolerance, static ± | 3 % |
| Static mains compensation, approx. | 0.1 % |
| Static load balancing, approx. | 1 % |
| Residual ripple peak-peak, max. | 150 mV |
| Residual ripple peak-peak, typ. | 50 mV |
| Spikes peak-peak, max. (bandwidth: 20 MHz) | 240 mV |
| Spikes peak-peak, typ. (bandwidth: 20 MHz) | 150 mV |
| Adjustment range | 22.8 … 28 V |
| product function output voltage adjustable | Yes |
| Output voltage setting | via potentiometer |
| Status display | Green LED for 24 V OK |
| Signaling | Relay contact (NO contact, rating 60 V DC/ 0.3 A) for “24 V OK” |
| On/off behavior | Overshoot of Vout < 3 % |
| Startup delay, max. | 0.3 s |
| Voltage rise, typ. | 30 ms |
| Rated current value Iout rated | 5 A |
| Current range | 0 … 6 A |
| ● Note | 5 A up to +60°C; +60 … +70 °C: Derating 3%/K |
| supplied active power typical | 120 W |
| short-term overload current | |
| ● on short-circuiting during the start-up typical | 15 A |
| ● at short-circuit during operation typical | 15 A |
| duration of overloading capability for excess current | |
| ● on short-circuiting during the start-up | 800 ms |
| ● at short-circuit during operation | 800 ms |
| Parallel switching for enhanced performance | Yes |
| Numbers of parallel switchable units for enhanced performance | 2 |
| Efficiency | |
| Efficiency at Vout rated, Iout rated, approx. | 88 % |
| Power loss at Vout rated, Iout rated, approx. | 17 W |
| power loss [W] during no-load operation maximum | 2.7 W |
| Closed-loop control | |
| Dynamic mains compensation (Vin rated ±15 %), max. | 0.3 % |
| Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. | 3 % |
| Load step setting time 10 to 90%, typ. | 1 ms |
| Load step setting time 90 to 10%, typ. | 1 ms |
| Protection and monitoring | |
| Output overvoltage protection | protection against overvoltage in case of internal fault Vout < 31.8 V |
| Current limitation | 7 … 7.5 A |
| property of the output short-circuit proof | Yes |
| Short-circuit protection | Constant current characteristic |
| enduring short circuit current RMS value | |
| ● typical | 7 A |
| overcurrent overload capability in normal operation | overload capability 150 % Iout rated up to 5 s/min |
| Overload/short-circuit indicator | – |
| Safety | |
| Primary/secondary isolation | Yes |
| galvanic isolation | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 |
| Protection class | Class I |
| leakage current | |
| ● maximum | 3.5 mA |
| ● typical | 1 mA |
| Degree of protection (EN 60529) | IP20 |
| Approvals | |
| CE mark | Yes |
| UL/cUL (CSA) approval | cULus-Listed (UL61010-2-201, CSA C22.2 No.142), cCSAus (CSA C22.2 No. 60950-1, UL 60950-1) |
| Explosion protection | IECEx Ex ec nC IIC T3 Gc; ATEX (EX) II 3G Ex ec nC IIC T3 Gc |
| certificate of suitability NEC Class 2 | No |
| CB approval | Yes |
| certificate of suitability EAC approval | Yes |
| Marine approval | BV, DNV GL |
| EMC | |
| Emitted interference | EN 61000-6-3 Class B |
| Supply harmonics limitation | EN 61000-3-2 |
| Noise immunity | EN 61000-6-2 |
| environmental conditions | |
| ambient temperature | |
| ● during operation | -30 … +70 °C |
| — Note | with natural convection |
| ● during transport | -40 … +85 °C |
| ● during storage | -40 … +85 °C |
| Humidity class according to EN 60721 | Climate class 3K3, 5 … 95% no condensation |
| Mechanics | |
| Connection technology | Push-in terminals |
| Connections | |
| ● Supply input | L, N, PE: 1 push-in terminal each for 0.2 … 2.5 mm² single-core/finely stranded |
| ● Output | +, -: 2 push-in terminals each for 0.2 … 2.5 mm² |
| ● Auxiliary | Signaling contact: 2 push-in terminals for 0.2 … 2.5 mm² |
| ● signaling contact | 2 push-in terminals for 0.2 … 2.5 mm² |
| product function | |
| ● removable terminal at input | Yes |
| ● removable terminal at output | Yes |
| Distributor | UNATRO ., JSC |
| width of the enclosure | 160 mm |
| height of the enclosure | 117 mm |
| depth of the enclosure | 74 mm |
| required spacing | |
| ● top | 50 mm |
| ● bottom | 50 mm |
| ● left | 0 mm |
| ● right | 0 mm |
| Weight, approx. | 0.5 kg |
| product feature of the enclosure housing can be lined up | Yes |
| Installation | Snaps onto DIN rail EN 60715 35×7.5/15 |
| electrical accessories | Redundancy module, buffer module, selectivity module, DC UPS |
| MTBF at 40 °C | 1 598 441 h |
| other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
Phân phối và báo giá PS 24V/5A 6EP7133-6AB00-0BN0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua mô-đun cung cấp nguồn ổn định SIMATIC ET 200SP, PS 24V/5A 6EP7133-6AB00-0BN0 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Tài liệu bổ sung:
- Thông số kỹ thuật/ DataSheet (PDF): Download tại đây!
- Tài liệu liên quan (Manuals, Certificates, FAQs…): Tại đây!
Đánh giá
Chưa có đánh giá nào.