6EP3436-8MB00-2CY0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP thuộc dòng PSU8600. Bộ cung cấp nguồn điện ổn định SITOP PSU8600, 3AC 20A/ 4x5A PN 6EP3436-8MB00-2CY0 được Công ty Cổ Phần UNATRO phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua SITOP PSU8600 6EP3436-8MB00-2CY0 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mô tả tóm tắt bằng tiếng Việt: Bộ cung cấp nguồn điện ổn định SITOP PSU8600, 3AC 20A/ 4x5A PN; Đầu vào: 400-500V 3AC; Đầu ra: 24 V DC/ 20 A/ 4x 5 A với kết nối PN/IE, tích hợp Máy chủ web, tích hợp Máy chủ OPC UA.
Mô tả tóm tắt bằng tiếng Anh: SITOP PSU8600 3AC 20A/4x5A PN Stabilized power supply Input: 400-500 V 3 AC output: 24 V DC/20 A/4x 5 A with PN/IE connection Integrated web server OPC UA server integrated.
Xem nhanh...
Bảng tóm tắt thông số kỹ thuật SITOP PSU8600 6EP3436-8MB00-2CY0
| Mã sản phẩm | 6EP3436-8MB00-2CY0 |
| Dòng sản phẩm | SITOP PSU8600 |
| Hãng sản xuất | SIEMENS |
| Xuất xứ | Austria (Áo) / AT |
| Nguồn đầu vào | 400-500 V 3 AC |
| Nguồn đầu ra | 24 V DC/20 A/4x 5 A |
| Kích thước (Rộng x Cao x Sâu) | 100 x 125 x 150 mm |
| Trọng lượng | 2 000 g |
Bảng chi tiết thông số kỹ thuật SITOP PSU8600 6EP3436-8MB00-2CY0
| Article number | 6EP3436-8MB00-2CY0
SITOP PSU8600/ 3AC/ 24VDC/ 20A/ 4X5A PN |
| Input | |
| Input | 3-phase AC |
| Rated voltage value Vin rated | 400 … 500 V |
| Voltage range AC | 320 … 575 V |
| ● Note | Derating 320 … 360 and 530 … 575 V |
| Wide-range input | Yes |
| Mains buffering | at Vin = 400 V; Prioritized supply Output 1 at power failure can be selected via DIP switch |
| Mains buffering at Iout rated, min. | 15 ms; at Vin = 400 V; Prioritized supply Output 1 at power failure can be selected via DIP switch |
| Rated line frequency 1 | 50 Hz |
| Rated line frequency 2 | 60 Hz |
| Rated line range | 47 … 63 Hz |
| input current | |
| ● at rated input voltage 400 V | 1.4 A |
| ● at rated input voltage 500 V | 1.1 A |
| Switch-on current limiting (+25 °C), max. | 14 A |
| I²t, max. | 1.2 A²·s |
| Built-in incoming fuse | none |
| Protection in the mains power input (IEC 898) | Required: 3-pole connected miniature circuit breaker 6 … 16 A characteristic C or circuit breaker 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) |
| Output | |
| Output | Controlled, isolated DC voltage |
| number of outputs | 4 |
| Rated voltage Vout DC | 24 V |
| ● output voltage at output 1 at DC rated value | 24 V |
| ● output voltage at output 2 at DC rated value | 24 V |
| ● output voltage at output 3 at DC rated value | 24 V |
| ● output voltage at output 4 at DC rated value | 24 V |
| Total tolerance, static ± | 3 % |
| Static mains compensation, approx. | 0.2 % |
| Static load balancing, approx. | 0.1 % |
| Residual ripple peak-peak, max. | 100 mV |
| Spikes peak-peak, max. (bandwidth: 20 MHz) | 200 mV |
| Adjustment range | 4 … 28 V |
| product function output voltage adjustable | Yes |
| Output voltage setting | via potentiometer or IE/PN interface; Derating > 24 V: 4%/V; max. 120 W per output, max. 480 W overall system |
| Status display | 3-color LED for operating state device; LED for operating mode manual/remote; 4 LEDs for communication PROFINET; 3-color LED per output for operating state output; LED green for parallel operation Output 1 and 2 / 3 and 4 |
| Signaling | Relay contact (changeover contact, contact current capacity DC 60 V/0.3 A) for “Operating state OK” |
| On/off behavior | No overshoot of Vout (soft start) |
| Startup delay, max. | 1 s; Without on-delay of the outputs |
| connection of outputs operating | Simultaneous connecting-in of all outputs after device booting or delay time of 25 ms, 100 ms or “load-optimized” for sequential cutting-in of the outputs via DIP switches can be set |
| voltage increase time of the output voltage maximum | 500 ms |
| Rated current value Iout rated | 20 A |
| output current | |
| ● per output | 5 A |
| ● at output 1 rated value | 5 A |
| ● at output 2 rated value | 5 A |
| ● at output 3 rated value | 5 A |
| ● at output 4 rated value | 5 A |
| Current range | 0 … 20 A |
| ● Note | +50 … +60 °C: Derating 2.5%/K; no derating in connection with expansion module CNX8600 and total load of the outputs at the basic device max. 240 W |
| supplied active power typical | 480 W |
| product feature parallel switching of outputs | Yes; Parallel circuit Output 1 with 2 or Output 3 with 4 can be selected via DIP switch |
| Parallel switching for enhanced performance | No |
| Efficiency | |
| Efficiency at Vout rated, Iout rated, approx. | 93 % |
| Power loss at Vout rated, Iout rated, approx. | 34 W |
| power loss [W] during no-load operation maximum | 12 W |
| Closed-loop control | |
| Dynamic mains compensation (Vin rated ±15 %), max. | 0.1 % |
| Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. | 0.4 % |
| setting time maximum | 10 ms |
| Protection and monitoring | |
| Output overvoltage protection | max. 35 V (max. 500 ms) |
| property of the output short-circuit proof | Yes |
| Short-circuit protection | electronic overload cut-off; optionally constant current operation can be selected for Output 4 via DIP switches |
| adjustable response value current of current-dependent overload trip | 0.5 … 5 A |
| type of threshold value setting | via potentiometer or IE/PN interface |
| characteristics of electronic overload switch-off | Ia >1.0…<1.5 x Ia threshold permissible for 5 s; Ia limit (= 1.5 x Ia threshold) permissible for 200 ms |
| characteristics of constant current operation | Ia limit (= 1.5 x Ia threshold) permissible for 5 s, afterwards Ia threshold continuous |
| Reset | via sensor per output or IE/PN interface |
| Remote reset | Non-electrically isolated 24 V input (signal level “high” at > 15 V) |
| overcurrent overload capability in normal operation | Total system overloadable 150% Ia rated to 5 s/min |
| Overload/short-circuit indicator | 3-color LED for operating state device; 3-color LED per output for operating state output |
| Interface | |
| Specification interface | Ethernet/PROFINET |
| design of the interface PROFINET protocol | Yes |
| protocol is supported OPC UA | Yes |
| Safety | |
| Primary/secondary isolation | Yes |
| galvanic isolation | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 |
| Protection class | Class I |
| leakage current | |
| ● maximum | 3.5 mA |
| Degree of protection (EN 60529) | IP20 |
| Approvals | |
| CE mark | Yes |
| UL/cUL (CSA) approval | cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1) |
| certificate of suitability NEC Class 2 | No |
| CB approval | Yes |
| certificate of suitability EAC approval | Yes |
| Marine approval | ABS, DNV GL |
| EMC | |
| Emitted interference | EN 55022 Class B |
| Supply harmonics limitation | EN 61000-3-2 |
| Noise immunity | EN 61000-6-2 |
| environmental conditions | |
| ambient temperature | |
| ● during operation | -25 … +60 °C |
| — Note | with natural convection |
| ● during transport | -40 … +85 °C |
| ● during storage | -40 … +85 °C |
| Humidity class according to EN 60721 | Climate class 3K3, 5 … 95% no condensation |
| Mechanics | |
| Connection technology | Plug-in terminals with screwed connection |
| Connections | |
| ● Supply input | L1, L2, L3, PE: Plug-in terminal with 1 screwed connection each for 0.2 … 4 mm² single-wire / fine stranded |
| ● Output | 1, 2, 3, 4: Two plug-in terminals (1, 2 and 3, 4) with 2 screwed connections each for 0.2 … 2.5 mm²; 0 V: Plug-in terminal with 3 screwed connections for 0.2 … 4 mm² |
| ● Auxiliary | RST (Reset): Plug-in terminal (together with alarm signal) with 1 screwed connection for 0.2 … 1.5 mm² |
| ● signaling contact | 11, 12, 14 (alarm signal): Plug-in terminal (together with Reset) with 1 screwed connection each for 0.2 … 1.5 mm² |
| product function | |
| ● removable terminal at input | Yes |
| ● removable terminal at output | Yes |
| design of the interface for communication | PROFINET/Ethernet: two RJ45 sockets (2-port switch) |
| suitability for interaction modular system | Yes |
| Distributor | UNATRO.,JSC |
| width of the enclosure | 100 mm |
| height of the enclosure | 125 mm |
| depth of the enclosure | 150 mm |
| required spacing | |
| ● top | 50 mm |
| ● bottom | 50 mm |
| ● left | 0 mm |
| ● right | 0 mm |
| Weight, approx. | 2 kg |
| product feature of the enclosure housing can be lined up | Yes |
| Installation | Snaps onto DIN rail EN 60715 35×15 |
| electrical accessories | Expansion modules CNX8600, buffer modules BUF8600, module UPS8600 |
| mechanical accessories | Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20 |
| MTBF at 40 °C | 243 178 h |
| other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
Phân phối và báo giá SITOP PSU8600 6EP3436-8MB00-2CY0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua bộ cung cấp nguồn điện ổn định SITOP PSU8600, 3AC 20A/ 4x5A PN 6EP3436-8MB00-2CY0 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Tài liệu bổ sung:
- Thông số kỹ thuật/ DataSheet (PDF): Download tại đây!
- Tài liệu liên quan (Manuals, Certificates, FAQs…): Tại đây!
Đánh giá
Chưa có đánh giá nào.