6EP3337-8SB00-0AY0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP thuộc dòng PSU8200. Bộ cung cấp nguồn ổn định SITOP PSU8200 24 V DC/40 A 6EP3337-8SB00-0AY0 được Công ty Cổ Phần UNATRO phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua SITOP PSU8200 6EP3337-8SB00-0AY0 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mô tả tóm tắt bằng tiếng Việt: Bộ cung cấp nguồn ổn định SITOP PSU8200 24 V/40 A; đầu vào: 120/230 V AC, đầu ra: 24 V DC/40 A.
Mô tả tóm tắt bằng tiếng Anh: SITOP PSU8200 24 V/40 A Stabilized power supply input: 120/230 V AC, output: 24 V DC/40 A.
Bảng tóm tắt thông số kỹ thuật SITOP PSU8200 6EP3337-8SB00-0AY0
| Mã sản phẩm | 6EP3337-8SB00-0AY0 |
| Dòng sản phẩm | SITOP PSU8200 |
| Hãng sản xuất | SIEMENS |
| Xuất xứ | Romania (Rumani) / RO |
| Nguồn đầu vào | 120/230 V AC |
| Nguồn đầu ra | 24 V DC/40 A |
| Kích thước (Rộng x Cao x Sâu) | 145 x 145 x 150 mm |
| Trọng lượng | 3 100 g |
Bảng chi tiết thông số kỹ thuật SITOP PSU8200 6EP3337-8SB00-0AY0
| Article number | 6EP3337-8SB00-0AY0
SITOP PSU8200/ 1AC/ 24VDC/ 40A |
| Input | |
| Input | 1-phase and 2-phase AC |
| ● Note | Automatic selection; startup starting from Ue ≥ 90/180 V |
| supply voltage | |
| ● 1 at AC rated value | 120 V |
| ● 2 at AC rated value | 230 V |
| input voltage | |
| ● 1 at AC | 85 … 132 V |
| ● 2 at AC | 170 … 264 V |
| Wide-range input | No |
| Mains buffering | at Vin = 230 V |
| Mains buffering at Iout rated, min. | 25 ms; at Vin = 230 V |
| Rated line frequency 1 | 50 Hz |
| Rated line frequency 2 | 60 Hz |
| Rated line range | 45 … 65 Hz |
| input current | |
| ● at rated input voltage 120 V | 15 A |
| ● at rated input voltage 230 V | 9 A |
| Switch-on current limiting (+25 °C), max. | 50 A |
| I²t, max. | 8 A²·s |
| Built-in incoming fuse | Yes |
| Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker at 1-phase operation: 16 A characteristic C; required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2421-4BA10 (120 V) or 3RV2411-1JA10 (230 V) |
| Output | |
| Output | Controlled, isolated DC voltage |
| Rated voltage Vout DC | 24 V |
| ● output voltage at output 1 at DC rated value | 24 V |
| Total tolerance, static ± | 3 % |
| Static mains compensation, approx. | 0.1 % |
| Static load balancing, approx. | 0.1 % |
| Residual ripple peak-peak, max. | 100 mV |
| Residual ripple peak-peak, typ. | 50 mV |
| Spikes peak-peak, max. (bandwidth: 20 MHz) | 240 mV |
| Spikes peak-peak, typ. (bandwidth: 20 MHz) | 220 mV |
| Adjustment range | 24 … 28 V |
| product function output voltage adjustable | Yes |
| Output voltage setting | via potentiometer; max. 960 W |
| Status display | Green LED for 24 V OK; LED yellow for overload; LED red for short-circuit or latching shutdown |
| Signaling | Relay contact (NO contact, rating 60 V DC/ 0.3 A) for “24 V OK” |
| On/off behavior | Overshoot of Vout approx. 3 % |
| Startup delay, max. | 1.5 s |
| Voltage rise, typ. | 30 ms |
| Rated current value Iout rated | 40 A |
| Current range | 0 … 40 A |
| ● Note | +60 … +70 °C: Derating 3%/K |
| supplied active power typical | 960 W |
| short-term overload current | |
| ● on short-circuiting during the start-up typical | 120 A |
| ● at short-circuit during operation typical | 120 A |
| duration of overloading capability for excess current | |
| ● on short-circuiting during the start-up | 25 ms |
| ● at short-circuit during operation | 25 ms |
| constant overload current | |
| ● on short-circuiting during the start-up typical | 60 A |
| Parallel switching for enhanced performance | Yes; switchable characteristic |
| Numbers of parallel switchable units for enhanced performance | 2 |
| Efficiency | |
| Efficiency at Vout rated, Iout rated, approx. | 92 % |
| Power loss at Vout rated, Iout rated, approx. | 82 W |
| power loss [W] during no-load operation maximum | 6.8 W |
| Closed-loop control | |
| Dynamic mains compensation (Vin rated ±15 %), max. | 1 % |
| Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. | 1.9 % |
| Load step setting time 50 to 100%, typ. | 2 ms |
| Load step setting time 100 to 50%, typ. | 2 ms |
| Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. | 3.8 % |
| Load step setting time 10 to 90%, typ. | 1 ms |
| Load step setting time 90 to 10%, typ. | 1 ms |
| setting time maximum | 1 ms |
| Protection and monitoring | |
| Output overvoltage protection | < 32 V |
| Current limitation, typ. | 41 A |
| property of the output short-circuit proof | Yes |
| Short-circuit protection | Alternatively, constant current characteristic approx. 41 A or latching shutdown |
| enduring short circuit current RMS value | |
| ● typical | 41 A |
| overcurrent overload capability in normal operation | 250% Iout rated up to 25 ms, 150% Iout rated up to 5 s/min |
| Overload/short-circuit indicator | LED yellow for “overload”, LED red for “latching shutdown” or “short-circuit” |
| Safety | |
| Primary/secondary isolation | Yes |
| galvanic isolation | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 |
| Protection class | Class I |
| leakage current | |
| ● maximum | 0.1 mA |
| ● typical | 0.1 mA |
| Degree of protection (EN 60529) | IP20 |
| Approvals | |
| CE mark | Yes |
| UL/cUL (CSA) approval | cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1) |
| certificate of suitability NEC Class 2 | No |
| CB approval | Yes |
| certificate of suitability EAC approval | Yes |
| Marine approval | ABS, DNV GL |
| EMC | |
| Emitted interference | EN 55022 Class B |
| Supply harmonics limitation | – |
| Noise immunity | EN 61000-6-2 |
| environmental conditions | |
| ambient temperature | |
| ● during operation | -25 … +70 °C |
| — Note | with natural convection |
| ● during transport | -40 … +85 °C |
| ● during storage | -40 … +85 °C |
| Humidity class according to EN 60721 | Climate class 3K3, 5 … 95% no condensation |
| Mechanics | |
| Connection technology | screw-type terminals |
| Connections | |
| ● Supply input | L, N, PE: 1 screw terminal each for 0.2 … 4 mm² single-core/finely stranded |
| ● Output | +, -: 2 screw terminals each for 0.5 … 10 mm² |
| ● Auxiliary | 13, 14 (alarm signal): 1 screw terminal each for 0.14 … 1.5 mm² |
| Distributor | UNATRO.,JSC |
| width of the enclosure | 145 mm |
| height of the enclosure | 145 mm |
| depth of the enclosure | 150 mm |
| required spacing | |
| ● top | 40 mm |
| ● bottom | 40 mm |
| ● left | 0 mm |
| ● right | 0 mm |
| Weight, approx. | 3.1 kg |
| product feature of the enclosure housing can be lined up | Yes |
| Installation | Snaps onto DIN rail EN 60715 35×15 |
| electrical accessories | Buffer module, redundancy module |
| mechanical accessories | Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20 |
| MTBF at 40 °C | 838 156 h |
| other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
Phân phối và báo giá SITOP PSU8200 6EP3337-8SB00-0AY0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua bộ cung cấp nguồn ổn định SITOP PSU8200 24 V DC/40 A 6EP3337-8SB00-0AY0 thì hãy liên hệ UNATRO.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Tài liệu bổ sung:
- Thông số kỹ thuật/ DataSheet (PDF): Download tại đây!
- Tài liệu liên quan (Manuals, Certificates, FAQs…): Tại đây!
Đánh giá
Chưa có đánh giá nào.